Beneteau FLYER 12 for sale

Summary

Over and above the Flyer 12 recognised qualities -
seaworthiness, safety, practicality and an Exclusive boat very easy to handle.

PRINCIPAL SPECIFICATIONS.

Length overall: 12.62 m.
Hull length: 11.98 m.
Hull beam: 3.99 m.
Dry weight: 8928 Kg.*
Light displacement weight: 9257 Kg.
Air draught: 4.20 m.
Draught: 1.16 m.
Fuel capacity: 1200 L.
Fresh water capacity: 320 L.
Maximum engine power:VolvoIPS 500 - 2 x 370 HP.

DESING.

Designed in accordance with European RCD requirements and CE certification, these regulations ensure that the Flyer 12 incorporates the minimum safety requirements including:
Safety and protection of persons on board.
Durability of materials.
Stability and safety.
Safety when manoeuvring.
Fire protection.
Protection of the environment and reduction of engine emissions.

EQUIPMENT.

The deck is fitted with:
Stainless steel stemhead fitting designed for stowage of a 20 Kg anchor.
1000 W vertical electric windlass, controlled from the windlass itself and the wheelhouse.
An anchor well with wide access to protect all the anchoring and mooring gear is fitted with two covers opening respectively into two self-draining compartments.
Two concealed hatches in the wide side decks give access to the water and diesel tank fillers.
Salt water washing pump under port hatch.
6 x 300 mm stainless steel mooring cleats with stainless steel protection to the bulwarks to prevent wear.

- ELECTRONICS PACK 2007-
Raymarine Series E 120 multifunction screen.
Black box depth sounder.

GPS Raystar 125 aerial.
2 Kw 24 Mn radome aerial.
Raymarine ST6002 Autopilot.

- THRUSTER YACHT CLUB PACK -
Bow thruster.
"Quiet flush" electric WC in owner’s cabin.
Seawater washing pump.
Complete ground tackle: 20 Kg Delta anchor, 10 mm diameter chain.
6 person table setting.
Interior curtains to side and aft picture windows.

CONSTRUCTION - HULL - The hull is laminated single-skin GRP construction for the topsides, whilst the underwater section is constructed in polyester balsa sandwich to reinforce the structure. The structural inner moulding ensures better insulation (thermal and sound) and an improved finish to the accommodation

Engine Details

DECEMBER 2016

Specification